Back
Original Xbox V1.0- V1.6,1.4Ghz Tualatin PIII CPU Upgraded,128mb RAM,Custom HS
Original Xbox V1.0- V1.6,1.4Ghz Tualatin PIII CPU Upgraded,128mb RAM,Custom HS
Pentium III (SL6BY)1.4GHz (NOS) upgraded OG Xbox's V1.0 - V1.6 Has 128mb RAM installed Has had the V_CPUCORE modified for 1.45v Has custom CPU/GPU heatsink bracket Has a milled OG heatsink installed to fit under the HDD bay without any …
$899.00
Description
Pentium III (SL6BY)1.4GHz (NOS) upgraded OG Xbox’s V1.0 – V1.6
Has 128mb RAM installed
Has had the V_CPUCORE modified for 1.45v
Has custom CPU/GPU heatsink bracket
Has a milled OG heatsink installed to fit under the HDD bay without any adjustment needed.
It has the Focus Encoder VDD rail modded to suit the V_CPUCORE rail voltage drop.
Recapped VCORE rail.
Pinheader installed to the LPC port.
TSOP write points populated with the required 200ohm 0402 resistors.
This unit is currently running OG MS kernel on the TSOP. You can flash the TSOP or install a modchip to open up the benefits of the CPU & RAM upgrades.
CPU is installed on zzattacks revised interposer and our custom designed 3D printed bracket.
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 30 × 30 × 10 cm |
| Revision | V1.0, V1.1, V1.2/3, V1.4, V1.6 |
3 reviews for Original Xbox V1.0- V1.6,1.4Ghz Tualatin PIII CPU Upgraded,128mb RAM,Custom HS
1-3 of 3 reviews
Add a review
Original Xbox V1.0- V1.6,1.4Ghz Tualatin PIII CPU Upgraded,128mb RAM,Custom HS
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
* Please tick the checkbox to proceed
works instantly after install just needed install my modchip
I recently purchased an upgraded Original Xbox motherboard, and it’s beautiful work. It’s exactly as described and works perfectly.
Motherboard does whats expected. CPU and RAM are upgraded, soldering looks very decent. The custom 3d-printed heatsink bracket fits perfect, holding the GPU and milled down CPU heatsink in place. After installing my modchip of choise, the board works as intended. The board fits in a unmodified case, but due to the upgraded CPU runs fairly hot at around 60°c with 100% fan speed under load. Custom case/cooling solution is reccomended. Overall awesome, proffesional upgraded product.